TK100F04K3 201 4 - 09- 26 1 toshiba field effect transistor silicon n channel mos type (u - mos iv ) TK100F04K3 swiching regulator, dc- dc converter applications motor drive applications ? aec- q101 qualified ? low drain - source on resistance : r ds (on) = 2.5 m ? (typ.) ? high forward transfer admittance: | y fs | = 174 s (typ.) ? low leakage current : i dss = 10 a (max ) (v ds = 40 v) ? enhancement - model: v th = 3 .0 to 4.0 v (v ds = 1 0 v, i d = 1 ma) absolute maximum ratings (ta = 25c) characteristics symbol rating unit drain - source voltage v dss 40 v drain - gate voltage (r gs = 20 k ? ) v dgr 40 v gate - source voltage v gss 20 v drain current dc (note 1) i d 100 a pulse (note 1) i dp 300 drain power dissipation (tc = 25 c) p d 180 w single pulse avalanche energy (note 2) e as 125 mj avalanche current i ar 100 a repetitive avalanche energy (note 3) e ar 18 mj channel temperat ure (note 4) t ch 175 c storage temperature range (note 4) t stg ? 55 to 175 c thermal characteristics characteristics symbol m ax unit thermal resistance, channel to case r th (ch - c) 0. 83 c /w note 1: please use devices on condition that the ch annel temperature is below 1 7 5 c . note 2: v dd = 25 v, t ch = 25 c, l = 13 h, r g = 25 ? , i ar = 100 a note 3: repetitive rating; pulse width limited by maximum channel temperature. note 4: 175 c refers to aec - q101. note 5 : using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appr opriate reliability upon reviewing the toshiba semiconductor reliability handbook (handling precautions/ derating concept and methods ) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). this transistor is an electrostatic sensitive device. please handle with caution unit : mm jedec ? jeita ? toshiba 2 - 10w1 s weight: 1.07 g (typ.) 1 3 2 start of commercial production 2008 - 03
TK100F04K3 201 4 - 09- 26 2 electrical characteristics (ta = 25 c) characteristics symbol test condition min typ. max unit gate leakage current i gss v gs = 20 v, v ds = 0 v ? ? 10 a drain cut - off current i dss v ds = 40 v, v gs = 0 v ? ? 10 a drain - source breakdown voltage v (br) dss i d = 10 ma, v gs = 0 v 40 ? ? v v (br) dsx i d = 10 ma, v gs = ? 20 v 20 ? ? gate threshold voltage v th v ds = 10 v, i d = 1 ma 3 .0 ? 4.0 v drain - source on resistance r ds (on) v gs = 10 v, i d = 5 0 a ? 2 .5 3.0 m ? forward transfer admittance ? y fs ? v ds = 10 v, i d = 50 a 87 174 ? s input capacitance c iss v ds = 10v, v gs = 0 v, f = 1 mhz ? 4500 ? pf reverse transfer capacitance c rss ? 900 ? output capacitance c oss ? 1100 ? switching time rise time t r ? 2 1 ? ns turn - on time t on ? 3 7 ? fall time t f ? 3 1 ? turn - off time t off ? 75 ? total gate charge (gate - source plus gate - drain) q g v dd 32 v, v gs = 10 v, i d = 100 a ? 102 ? nc gate - source charge q gs ? 56 ? gate - drain ( miller ) charge q gd ? 4 6 ? source - drain ratings and characteristics (ta = 25 c) characteristics symbol test condition min typ. max unit continuous drain reverse current ( note 1) i dr ? ? ? 100 a pulse drain reverse current ( note 1) i drp ? ? ? 300 a forward voltage (diode) v dsf i dr = 100 a, v gs = 0 v ? ? ? 1.2 v reverse recovery time t rr i dr = 100 a, v gs = 0 v, di dr /dt = 50 a/ s ? 6 1 ? ns reverse recovery charge q rr ? 4 9 ? n c marking note 6 : a line under a lot no. identifies the indication of prod uct labels. [[g]]/rohs compatible or [[g]]/rohs [[pb]] please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. the rohs is the directive 20 11/ 6 5/e u of the european parliament and of the council of 8 j une 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. duty 1%, t w = 10 s 0 v 10 v v gs r l = 0.4 ? v dd 20 v i d = 50 a v out 4.7 ? k100f04k 3 lot no. note 6 part no. (or abbreviation code )
TK100F04K3 201 4 - 09- 26 3 moisture -p roof packing the tk 100f04k3 is packed in a moisture - proof laminated aluminum bag. precautions for transporta tion and storage (1) avoid excessive vibration during transport ation. (2) do not toss or drop the pack ed devices to avoid ripping of the bag. (3) after opening the moisture - proof bag, the devices should be assembled within two weeks in an environment of 5 c to 30 c an d rh70% or below. perform reflow at most twice. (4) the moisture - proof bag may be stored unopened for up to 12 months at 5 c to 30 c and rh90% or below. (5) if, upon opening the bag, the moisture indicator card shows humidity of 30% or above (the color of the 30% dot has changed from blue to pink) or the expiration date has passed, the devices should be baked as follows: baking conditions: 125 c for 48 hours. since the tape materials are not heat - proof, devices should be placed on either heat - proof trays or aluminu m magazines when baking. 30% the humidity indicator shows an approximate ambient humidity at 25 c. if the ambient humidity is below 30% , the color of all the indicator dots is blue. i f, upon opening the bag, the color of the 30% dot has changed from blue to pink , the devices should be baked before assembly.
TK100F04K3 201 4 - 09- 26 4 v gs = 10 v 1 10 1000 1 100 10 10 1000 1 10 1000 tc = ? 55 c 25 100 100 1 100 8 12 16 20 0 0.4 0.6 0.8 1 0.2 0 4 i d = 100 a 25 50 4 8 0 80 160 40 0 2 6 tc = ? 55 c 100 25 120 200 0.8 1.2 1.6 2 0 80 160 200 40 0 0.4 v gs = 5.4 v 6.3 5.8 8 10 7 6.5 6 120 v gs = 5.2 v 5.4 5.6 5.8 7 8 10 0 20 40 60 80 100 0.4 0.6 0.8 1.0 0 0.2 6.5 6 common source tc = 25c pulse test i d C v ds i d C v ds i d C v gs v ds C v gs common source tc = 25c pulse test |y fs | C i d r ds (on) C i d drain - source voltage v ds (v) drain current i d (a) drain - source voltage v ds (v) drain current i d (a) gate - source voltage v gs (v) drain current i d (a) gate - source voltage v gs (v) drain current i d (a) drain current i d (a) drain - source on resistance r ds (on) (m? ) drain - source voltage v ds (v) forward transfer admittance ? y fs ? (s) common source tc = 25c pulse test common source tc = 25c pulse test common source v ds = 10 v pulse test common source v ds = 10 v pulse test
TK100F04K3 201 4 - 09- 26 5 v dd = 32 v v ds v gs 16 8 16 12 10 6 4 0 0 0 60 160 10 20 40 60 80 120 30 50 70 100 140 20 80 40 14 8 2 0 ? 80 0 40 80 120 160 ? 40 1 2 3 4 5 200 1000 100000 10000 1 0.1 100 10 c iss c oss c rss 100 0 ? 0.4 ? 0.8 1 1000 100 v gs = 0v 1 10 5 3 ? 1.2 10 0.1 i d = 25,50 a 0 6 2 3 ? 80 0 40 80 120 160 ? 40 4 1 100 a 5 200 v th ? tc r ds (on) ? tc i dr ? v ds p d ? tc common source tc = 25c pulse test common source v gs = 0 v f =1mhz tc = 25 c common source v ds = 10 v i d = 1ma pulse test case temperature tc ( c) gate th reshold voltage v th (v) case temperature tc ( c) total gate charge q g (nc) capacitance c (pf) capacitance C v ds drain - source voltage v ds (v) drain - source on resistance r ds (on) (m? ) case temperature tc ( c) drain reverse current i dr (a) drain - source voltage v ds (v) drain power dissipation p d (w) drain - source voltage v ds (v) dynamic input / output characteristics gate - source voltage v gs (v) common source i d = 100 a t c = 25c pulse test common source v gs = 10 v pulse test 100 150 250 0 0 80 40 200 160 50 200 120
TK100F04K3 201 4 - 09- 26 6 100 s * 1 ms * 1000 0.1 10 0.1 1 100 100 10 v dss max 1 0.01 10 100 1m 10m 100m 1 10 0.1 1 10 duty=0.5 0.2 0.1 0.05 0.02 0.01 p dm duty = t/t r th (ch - c) = 0.83 c/w t t 0.01 e as C t ch channel temperature (initial) t ch ( c) avalanche energy e as (mj) 0 v 15 v i ar b vdss v dd v ds r g = 25 ? v dd = 25 v, l = 1 3 h ? ? ? ? ? ? ? ? ? ? ? ? = v dd b vdss b vdss 2 i l 2 1 as test circuit waveform r th C t w pulse width tw (s) normalized transient thermal impedance r th (t) /r th (ch - c) single pulse single pulse t c =25 c urves m ust b e d erated l inearly w ith i ncrease i n t emperatu re. i d max (pulse) * i d max ( continuous ) dc opeation t c = 25c safe operating area drain - source voltage v ds (v) drain current i d (a) e 160 120 80 40 0 25 50 100 125 175 200 200 75 150 l = 13h v dd = 25v i ar = 1 0 0a
TK100F04K3 201 4 - 09- 26 7 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collectively "toshiba"), reserve the righ t to make changes to the information in this document, and related hardware, software and systems (collectively "product") without notice. ? this document and any information herein may not be reproduced without prior written permission from toshiba. even with toshiba's written permission, reproduction is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of product could cause loss of human life, bodily inju ry or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest version s of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and applic ation notes for product and the precautions and conditions set forth in the "toshiba semiconductor reliability handbook" and ( b) the instructions for the application with which the product will be used with or for. customers are solely responsible for all as pects of their own product design or applications, including but not limited to (a) determining the appropriateness of the u se of this product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers' product design or applications. ? product is neither intended nor warranted for use in equipments or systems that require extraordin arily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage and/or serious public impact ( " unintended use " ). except for specific applications as expressly st ated in this document, unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance - related fields. if you use product for unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse - engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any pro ducts or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is presented only as guidance for product use. no responsibility is assumed by toshiba for a ny infringement of paten ts or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signe d agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, incl uding warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related software or technology for any military purposes, including withou t limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or mis sile technology products (mass destruction weapons). product and related software and technology may be controlled under the appl icable export laws and regulations including, without limitation, the japanese foreign exchange and foreign trade law and the u.s. export administration regulations. export and re - export of product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pr oduct. please use product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losse s occurring as a resul t of noncompliance w ith applicable laws and regul at i o n s .
|
